Suspender Snap Repair Kit: Fix Worn Belt Snaps Yourself

By Occidental Leather - Tool Carrying Systems | Published: 2026-11-03

Category: ハウツーガイド

Learn how to replace worn snaps on your Occidental Leather suspenders with the Suspender Snap Repair Kit. Step-by-step instructions for a secure fix.

Quick answer

Use the Suspender Snap Repair Kit to replace worn snaps on your Occidental Leather 5009 or 5055 suspension system. The kit includes snap clips, copper rivets, and instructions for hand setting, so you can complete the repair at home with basic tools.

When to repair instead of replace

If your suspender snaps no longer hold securely but the rest of the suspension system is in good condition, a repair kit is a cost-effective fix. The Suspender Snap Repair Kit is designed specifically for the 5009 and 5055 models, ensuring compatibility. However, if the fabric or other components are heavily worn, replacing the entire suspension system may be more practical.

Tools you'll need

The kit provides the snap clips and copper rivets, but you'll need a few common tools: a hammer, a hard surface (like an anvil or metal block), a punch or awl to remove old rivets, and a rivet setter or punch to set the new rivets. The included instructions explain how to hand-set the copper rivets, but having the right tools makes the job easier.

Step-by-step snap replacement

Remove the old snap: Use a punch or drill to carefully remove the old rivet holding the worn snap. Support the back of the rivet to avoid damaging the fabric. Work slowly to avoid enlarging the hole in the fabric.
Position the new snap clip: Place the new snap clip over the hole, aligning it with the original position. Make sure the snap faces the correct direction. Check that the snap orientation matches the other snaps on the suspenders.
Insert the copper rivet: Push the copper rivet through the snap clip and fabric from the front, then place the burr on the back side. Ensure the burr sits flat against the fabric.
Set the rivet: Using a hammer and a rivet setter (or a punch), strike the rivet firmly to compress the burr and secure the snap. Follow the included instructions for proper hand-setting technique. Strike squarely to avoid bending the rivet.
Test the snap: Snap and unsnap the connection several times to ensure it holds securely and releases smoothly. If the snap feels loose, re-set the rivet with additional force.

Product facts

Suspender Snap Repair Kit: Kit includes 4 snap clips, 5 copper rivet & burr pairs, and instructions for hand setting copper rivets. Provides all necessary hardware for a complete repair, with extras in case of mistakes.
Suspender Snap Repair Kit